https://www.youtube.com/watch?v=aUJN93I-aEg Large-format 3D printing has been stuck in a frustrating paradox for years. You could have massive build volumes or you could have speed, but rarely both without spending industrial-level money. Consider the Prusa XL with its respectable 360×360×360mm build volume crawling along at conservative speeds, or the Bambu X1 Carbon screaming at 500mm/s but
Travelling I assume. Printing very much depends on the fillament etc. not much a printer can do to change that. But a nearly 30% increase in travel speed has a significant effect on the over all time.
Travelling I assume. Printing very much depends on the fillament etc. not much a printer can do to change that. But a nearly 30% increase in travel speed has a significant effect on the over all time.
The regular sv08 also has 700mm/s max so I’m not sure where you’re getting the 30% increase from
First printer this size and price range. Above 500mm.
You state theres a 30% increase in travel speed…but there isn’t, it’s literally the exact same speed as the normal sv08.
Are you comparing to some random other printer from another manufacturer?
Get your head out of your arse hole.
Nothing in the thread requires your anal level of analysis. The vast majority of 3d printers are 500mms.
I have no requirement to consider one printer made by the same fucking company when answering if the speed relates to travel or print.
When you are review an academic paper such anal interpretations may matter. Some jo commenting on print vs travel in just fucking pathetic.
Jesus fucking Christ buddy, calm down you crazy bastard…