Currently using a FLSUN Super racer. It’s a delta style printer and fast as hell compared to the printers I had before. 400 hours on it currently.
Had a Ender 3 before it. Lots of issues. Ended up giving it away to a friend who still uses it and still has random issues.
First printer was a Printrbot Simple Metal. Bought one the moment a heated bed was a option. Great printer for the time, but dated now. Keep thinking about resurrecting it to print flexibles on of these days.
I have an Ender 3 V2 that I barely ever print on any more because I have a RatRig V-Minion now. I love this little monster, it’s so fast.
Ender 3 S1 Pro.
Ender 5 with the following upgrades:
- BigTreeTech skr mini v2
- MicroSwiss hot end
- Orbiter extruder
- BLTouch
- OctoPrint
I’m quite happy with it, print quality is mostly decent although it requires a lot of tweaking to get to good quality.
Primary: Artillery Sidewinder X1, absolutely stock except for parts that needed replacement but even those are just part swap, no upgrades or mods.
Secondary: MP Select mini Frame and some motors. The board is the motherboard form a Tronxy X5S. the bed is a manual replacement from an off brand and it has an off the shelf 12 V 300W PSU.
Ender3 v2 running Klipper with a BLTouch and a Micro Swiss NG extruder.
Ender 3 max neo, how do you check the number of hours ?
I have a couple of prusa mk3s one of which I’m upgrading to the 4
Wanhao i3 Duplicator was my first printer. Used it for ever but I finally gave up on it after countless hours modifying and upgrading it.
Bought a p1p and holy shit is this thing amazing. I should have done this so much sooner.
Just built and enclosure for the p1p, and I am going to salvage what I can from the i3 and make a voron 0.2
Flashforge Creator Pro (Modded to single E3d V6 Hotend), Voxelab Aries, Voxelab Aquila, SUNLUT3, Ender 5 S1, Ender 2 Pro, Kingroon KP3S Pro S1 (I currently have a love hate with this one).
Have another Ender 2 Pro sitting waiting for mods, and a Monoprice Ultimate 2 waiting for a custom flash.
I think the next one will be a custom from the groud up build. I want something large.
Started with Ender 3 but got annoyed with it not being very reliable for me (probably due to my own modifications). Now using the Sovol SV06 and very happy with it so far after a couple months.
its an ender 3 in the same way that a dune buggy is a vw beetle. the only stock bits that remain are the frame and some of the steppers. it’s gone direct drive, all metal, glass bed, klipper firmware on a btt mini e3v2 all running off of a mac mini with octoprint.
Makerbot replicator 2. Old as hell but still gets the job done for my limited purposes.
Kingroon KP3S here. Totally stock. No issues with it, always had good quality from it out of the box. I want to add a touch sensor and klipper to it but haven’t had the time to figure it out
Prusa Mini+
Creality CR10 - Almost every aspect of it was upgraded.
- Control box delete, relocated electronics/psu under the frame.
- Dual z leadscrews with anti-backlash nuts and oldham couplers
- Linear rails for XY Axis
- Bigger XY stepper motors
- HeroMe Gen 7: Dual 5015 cooling fans
- Nocuta 40mm hotend fan
- Noctua 40mm electronics fan
- BLTouch
- Orbiter v2.0
- Spider 3.0 hotend w/ MicroSwiss .4/.6 Nozzle
- SKR E3 Mini V3
- Raspberry Pi (OctoPrint)
- Removable PEI Sheet -Solid Bed mount
I can print just under 190mm/s at volumetric flow rates of 20-25mm3/s. Also gonna try out those CHT nozzles and see if they can help with flow rates too.
I am planning on getting a lighter y carriage and lighter alu bed and see if i can go faster
Also upgrading to an AC powered bed. Probably going to leave it with the 12v PSU, once i get the AC powered bed.
Hotend doesn’t take long to heat up unlike the bed almost 16-18 mins to 90c.
I will probably be getting a prusa mk4 or BambuLabs x1c as my next printer then a Voron. Once I get one of these my Prusa Mini will be converted to coreXY.
Id still go with 24v. I think switching psu’s would’ve netted more than the new steppers.
A Voron 0.1 with a 0.2 gantry and a Voron 2.4 with a 2.4r2 gantry (currently being upgraded to canbus and stealthburner).
